Gately - Shield 8" Subwoofer
Gately - Shield 8" Subwoofer
Gately - Shield 8" Subwoofer
Gately - Shield 8" Subwoofer
Gately - Shield 8" Subwoofer
Gately - Shield 8" Subwoofer

Gately - Shield 8" Subwoofer

Regular price$169.00
/

  • Free shipping*

Embossed Gately Audio dustcap with paper cone stitched to a high roll surround. 

Black powder-coated GATELY engineered basket 

Dual Progressive nomex spiders with stitched flat wound tinsel leads connect to oversized push terminals. 

8” Shield subwoofers use a 2.5” 4 layer high temp copper wound while the voice coil.

Shield 8” have a motor structure that consists of a 2 layer Y35 ferrite magnet that measures 5.75” in diameter by 1” thick per slug. 

Mounting depth = 5.75"
Mounting diameter = 7.3125"
Outside diameter = 8.75"

Recommended sealed enclosure = .3'-.4'
Recommended Ported enclosure = .55'-.8' 

 

 SPECIFICATIONS

 

Watts

600 RMS

MIN INTERNAL VOL 0.55 cubic feet 
MAX INTERNAL VOL 0.8 cubic feet 
MIN Port Area 9 sq inches
MAX Port Area 12 sq inches

 

Model: Shield 8 D2
f(s) = 37.45 Hz
Q(ts) = 0.5151
V(as) = 6.251 liters (0.2208 cubic feet)
SPL = 79.46 dB SPL 1W/1m
Nominal Diam. = 0 mm (0 in.)

R(e) = 1.115 Ohms
Q(es) = 0.5747
Piston Diam. = 158.8 mm (6.25 in.)
SPL = 88.02 dB SPL 2.83 Vrms
C(ms) = 0.114 mm/N

Z(max) = 10.76 Ohms
L(e) = 0.3901 mH at 10kHz
Q(ms) = 4.97
BL = 8.521
n(0) = 0.05447 %
M(ms) = 159 grams

--------------------------------------------------------------------

Model: Shield 8 D4
f(s) = 40.14 Hz
Q(ts) = 0.5674
V(as) = 6.037 liters (0.2132 cubic feet)
SPL = 79.76 dB SPL 1W/1m
Nominal Diam. = 0 mm (0 in.)

R(e) = 2.021 Ohms
Q(es) = 0.6382
Piston Diam. = 158.8 mm (6.25 in.)
SPL = 85.73 dB SPL 2.83 Vrms
C(ms) = 0.11 mm/N

Z(max) = 18.21 Ohms
L(e) = 0.5859 mH at 10kHz
Q(ms) = 5.115
BL = 10.7
n(0) = 0.05833 %
M(ms) = 143.3 grams

As soon as your item is ready to ship you will receive an email with tracking information. We use FedEx, UPS and YRC Freight for all shipments.

*Shipping is free in the lower 48 states, unless otherwise stated.

This site is protected by hCaptcha and the hCaptcha Privacy Policy and Terms of Service apply.

Customer Reviews

Based on 5 reviews
100%
(5)
0%
(0)
0%
(0)
0%
(0)
0%
(0)
J
JOE GROSSMAN
Review update “BEST BANG FOR YOUR BUCK”

Finally took the time to build my new box after using the Skar box as a test run… All I can say is HOLY FREAKING SH!T!!! These Shield subs have re-impressed me once again!! Switched my amp over to the Ruthless 2300.1 wired to 1/2 ohm that Bobby personally convinced me to switch to. Man do things bang! Blew my cabin filters out of the back of the cab in the 1st 10 15 seconds of E-40 life lessons. Going to build another box to change a few things and toss this box in another 1 of our work trucks in the next few months. I’m sure that the next box with a few tweaks will even shock me more. Once that happens I’ll order 4 more of the same. Going to build a box for the wife’s bronco and run the same subs but 3 of the 2ohm and whatever amp Bobby says!! GATELY ALL THE WAY!!!

Hey Joe! Blew out the cabin air filters...lol, that's wild. Reach out if you have any other questions or when you are ready for more subs. :-)

C
Cole
2 Shield 8’s

I got 2 of the shield 8’s for my truck and i am running about 600 to 650 watts to each and these things hit like a truck they have both of my mirrors shaking. Would highly recommend

Awesome, so glad you are enjoying the Shield subwoofers. :-)

T
Tom Rasica

Great addition to my system.Great subs!!

D
David Gutierrez
Great Subs!

Running 4 on a d4s jp 13 in my f150 and all i can say is wow. They get down. Highly recommend these woofers!

Thank you for taking the time to leave a review. We appreciate your business. :-)

J
JOE GROSSMAN
BEST BANG FOR YOUR BUCK!!!

I had a quad 8" Skar box and 4 Sundown 8's firing downward that we put in my work truck a 2024 Chevrolet 2500HD single cab running off a Sundown SIA 1750 wired to 1 ohm. It was nice, but did not do what I expected. So I bought 4 of the Gately Sheilds swapped them over and put in a Sundown SFB-3000D amp on them. Man do they sound great and hit way harder. Now I am going to build a new box out of Birch plywood but increase the size to get these suckers some more air space and a bigger port. I think the new box will make an even bigger improvement! From here on out I am only buying Gately subs for my vehicles.

Thanks Joe, we love getting feedback from our customers. :-)

You may also like

Innovative

Gately Acrylic

We are dedicated to building unique and beautiful enclosures that sound as good as they look.